Are the masks washable?
Yes! Our masks are washable. Simply remove the PM 2.5 filter & the LED Screen. We recommended washing it on a gentle cycle in warm water and tumble dry on low. We also opted to have a replaceable filter to alleviate having to wash the entire mask constantly. On the inside of the mask, there is an opening to slide in a new filter. Each mask comes with 1x PM2.5 filter.
Is it safe?
Yes its safe! A fitted face mask with a PM2.5 filter offers a high degree of filtration from particulates and aerosol. The PM2.5 name comes from these filters' original use as protection against Particulate Matter 2.5, the smallest and most dangerous form of air pollution. Aerosol particulates that may harbor viruses are much smaller than most particulate matter, but research has shown a PM2.5 filter can capture nanoparticles similar size with a high degree of efficiency (approx. 95%), and lab tests show a PM2.5 filter witha properly-fitted cloth mask can reduce total airborne particulates by as much as 90%.
Are PM 2.5 Filters similar to N95?
While N95 masks are the highest standard in theindustry for particle and aerosol filtration, PM 2.5 filters are extremely similar as they are made with the same materials as N95 with an additional carbon filter.
How do i use the LED?
Follow these 5 simple steps to get your MaeMask activated
Step 1: Get Started
Remove the LED light strip from packaging.
Step 2: Turn ON the mask
Turn the LED light strip on by pushing the white switch to the left side, towards the wires.
Step 3: Install the LED light strip panel into the mask
Carefully slide the LED light strip inside the mask on the back side opening
Step 4: Double check the installation
Make sure all components are snug and secure inside the face mask.
Step 5: You're all set to wear the LED Smart Mask!
Time to go out and show off your new smile.